MT10 Precision Turntable

Belt drive
Moving Coil cartridge
Illuminated speed meter

Eligible for online purchase?

3 Year Limited Warranty

Add to WishlistRemove From Wishlist

Print this page

COMPARE

Ask an Expert

MT10 Precision Turntable

3 Year Limited Warranty

Print this page

COMPARE

Ask an Expert

Add to WishlistRemove From Wishlist

With tracking force, anti-skate and cartridge position preset at the factory, the McIntosh MT10 Precision Turntable delivers high performance LP playback with minimal set up. A custom tonearm features a rigid, dural-aluminum arm-tube gimbaled in two sapphire (horizontal) and two ceramic (vertical) bearings for the least possible friction. A .5mV moving coil cartridge is included, and features an ebony body with an elliptical stylus. Enjoy a new level of music with the MT10 turntable. Contact your local dealer to learn more.

WATCH: Unboxing and Setting Up the McIntosh MT10 Precision Turntable

Specifications
Cartridge Specifications
- Cartridge Type
  
  Moving Coil, Low Output
- Output Level
  
  0.5 mV at 5 cm/s
- Load Impedance
  
  400 to 500 Ohms recommended
- Frequency Response
  
  20Hz to 50kHz
- Channel Separation
  
  Greater than 30dB at 1Khz
- Compliance
  
  6 x 10^-6 cm/dyne
- Recommended Tracking Force
  
  2.4 g
- Channel Difference
  
  Less than 0.3dB at 1kHz
- Total Mass
  
  11 g
- Stylus
  
  Elliptical Diamond
- Cantilever Material
  
  Aluminum
Tonearm Specifications
- Bearing
  
  Sapphire and Ceramic
- Arm Tube
  
  Dural-Aluminum
- Counterweight
  
  Eccentric
- Adjustments
  
  Vertical Tracking Angle, Antiskate, Azimuth
Turntable Specifications
- Playback Speeds
  
  33-1/3, 45 and 78 rpm
- Motor Type
  
  DC Brushless
- Speed Control
  
  Electronic w/ braking feature
- Platter
  
  Silicon Acrylic
- Platter Bearing
  
  Magnetic Suspended Ceramic
- Signal To Noise Ratio
  
  41dB - 44dB
- Wow & Flutter
  
  0.10% - 0.15%
Connectivity
- Stereo Outputs Unbalanced
  
  1
Control
- Power Control Input
  
  1
- Power Control Output
  
  1
- Platter Light
  
  Yes
- Speed Control Fine Adjustment
  
  Yes
General Specifications
- Dust Cover Included
  
  No
Weights & Dimensions
- Unit Dimensions (W x H x D)
  
  17-1/2" (44.45cm) x 8-13/16" (22.38cm) x 21" (53.34cm)
  Note: Tone Arm Height will vary depending on the type of Cartridge installed.
- Unit Weight
  
  42 lbs (19 kg)
- Shipping Weight
  
  63 lbs (28.6 kg)

Downloads

Product Literature	User Documents
MT10 Precision Turntable Brochure (0.13 MB)	MT10 Precision Turntable Owner's Manual (5.15 MB) Important Additional Operation Information Guide - Lithium Batteries (4.91 MB)